| Issue |
E3S Web Conf.
Volume 244, 2021
XXII International Scientific Conference Energy Management of Municipal Facilities and Sustainable Energy Technologies (EMMFT-2020)
|
|
|---|---|---|
| Article Number | 05021 | |
| Number of page(s) | 9 | |
| Section | Ecodesign and Energy Labelling | |
| DOI | https://doi.org/10.1051/e3sconf/202124405021 | |
| Published online | 19 March 2021 | |
Automation of repetitive tasks when designing an eco-friendly residential home
1 Moscow State University of Civil Engineering, 26, Yaroslavskoe shosse, 129337, Moscow, Russia
* Corresponding author: nknyazeva@mgsu.ru
The main goal discussed in this article is the creation of tools for the implementation of calculation tasks at the design stage. The proposed method helps to significantly reduce labor, time and money costs both at the design stage and in the subsequent construction of the building. To implement the task, two approaches were used in parametric modeling using two different tools in BIM modeling. With the help of Revit and ArchiCAD, as well as their extensions Dynamo and Grasshopper, solutions were created to speed up the calculations required in the process of implementing projects of varying complexity. The results obtained revealed the main differences in the implementation of one task in two different software packages. Moreover, each of the obtained solutions is flexible and can be used in other projects. Also, these solutions can be upgraded to implement calculations of other characteristics of design solutions in the project. Thus, the task was implemented and applied in the Revit and ArchiCAD project.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.