E3S Web Conf.
Volume 244, 2021XXII International Scientific Conference Energy Management of Municipal Facilities and Sustainable Energy Technologies (EMMFT-2020)
|Number of page(s)||10|
|Section||Green Transport Systems|
|Published online||19 March 2021|
Application of automated systems for quality control of ground anti-icing treatment of aircraft
1 Moscow Aviation Institute (National Technical University), Volokolamckoe shosse, 4, Moscow, 125993, Russia
2 Voronezh State Technical University, 20 years of October st., 84, Voronezh, 394006, Russia
* Corresponding author: firstname.lastname@example.org
For the first time, this paper addresses the need to automate the maintenance of the quality control and control system at all stages and stages of the life cycle - anti-conduct fluid (POJ) for ground-based anti-de-dealing treatment (POO) of an aircraft. The possibility of evolution of the quality control of the object of ground de-icing physical and chemical treatment of the surface of the aircraft - de-icing liquids, in “Management of quality - de-icing liquid as an object to ensure the safe take-off of the aircraft” is considered. The definition was introduced: “The quality of de-icing liquid.” To integrate into the system “Management of the quality of de-icing fluid” - on the basis of knowledge bases about THE POJ introduced as a functional concept “The quality of de-icing liquid at the POO stage”. In order to introduce information software support for the POO process using databases and control systems, the concept of “Regeloscopic Ground De-Icing Protection Program of the Armed Forces” has been introduced, which will allow and move to an effective method of improving the quality of the service - integrated automation of the POO.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.