| Issue |
E3S Web Conf.
Volume 245, 2021
2021 5th International Conference on Advances in Energy, Environment and Chemical Science (AEECS 2021)
|
|
|---|---|---|
| Article Number | 03009 | |
| Number of page(s) | 4 | |
| Section | Chemical Performance Research and Chemical Industry Technology Research and Development | |
| DOI | https://doi.org/10.1051/e3sconf/202124503009 | |
| Published online | 24 March 2021 | |
Study on mechanical properties and microstructure of DP590 steel with different annealing process
1 Insititute of Intelligent Manufacturing, Jianghan University, 430056, Wuhan, China
2 Baosteel Central Research Institute, 430056, Wuhan, China
* Corresponding author: pan97181@126.com
Annealing process is critical to mechanical properties and microstructure of DP steel. For DP steel with strength grade of 590MPa, experiments with different combinations of intercritical annealing temperature and over-aging temperature were carried out during annealing. The tensile tests of the final products and nanohardness tests of different phases were made, and the microstructures were analyzed. The results indicated that higher intercritical annealing temperature was favorable to higher volume fraction of martensite and lower nanohardness of martensite with lower C density. The ultimate tensile strength increased monotonously with the volume fraction of martensite increasing. Higher over aging temperature would make martensite islands be partially resolved and carbides precipitate, which made lower volume fraction of martensite, and resulted in lower nanohardness of martensite. The revealed rules could provide important guide to control material properties of DP steel by manipulating annealing process.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.