E3S Web Conf.
Volume 248, 20212021 3rd International Conference on Civil Architecture and Energy Science (CAES 2021)
|Number of page(s)||6|
|Section||Research on Civil Water Conservancy Engineering and Urban Architecture|
|Published online||12 April 2021|
Research on Status and Improvement of Indoor Thermal Environment for Existing New Rural Building in Chengdu
Institute of Architectural Engineering, Chengdu Textile College, Chengdu, 611731, China
* Corresponding author: firstname.lastname@example.org
Through the practical measurement and theoretical calculation of the indoor thermal parameters about the existing new rural building in Chengdu, this paper concludes that the indoor thermal environment of Chengdu is very poor. In addition, we propose an energy saving improvement scheme according to the “Design Standard for Energy Efficiency of Rural Residential Buildings” GB/T50824-2013 and the local characters of Chengdu. We also simulate the indoor thermal environment of existing new rural building and improved building using Design-Builder software. As compared with the existing new rural building, we know that the improved building has greatly improved in the indoor thermal environment. The indoor average temperature decreases 2°C-6°C in summer and rises 2°C -7.7°C in winter. As to the humidity between 30% and 60%, the rise rate of each room reaches above 12.9% in summer and reaches 28.8% in winter. The rise rate of PMV index of -1 to +1 reaches above 68.4% in summer and 54.4% in winter from below 20%. The improved building meets the living requirements for local resident in most time.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.