E3S Web Conf.
Volume 252, 20212021 International Conference on Power Grid System and Green Energy (PGSGE 2021)
|Number of page(s)||5|
|Section||Research and Development of Electrical Equipment and Energy Nuclear Power Devices|
|Published online||23 April 2021|
Boosting dimensional stability and proton conductive of proton exchange membrane by introducing SO3H-UiO-66 coated nanofibers
1 Department of Materials Science and Engineering, New Energy and Material college, China University of Petroleum-Beijing, Beijing 102249, People’s Republic of China
2 Beijing Key Laboratory of Failure, Corrosion, and Protection of Oil/Gas Facilities, China University of Petroleum-Beijing, Beijing 102249, People’s Republic of China
* Corresponding author: email@example.com
In this work, we fabricated cross-linked pre-oxidized polyacrylonitrile nanofibers (PPNF) coating SO3H-UiO-66 coated (named SU6@PPNF), which was introduced into sulfonated poly (ether ether ketone) SPEEK to produce membrane with superior proton conductivity, dimensional stability and mechanical properties under hydrated condition. The membrane displays a maximum power density of 172.1 mW cm-2 under 100% RH and 60 °C, which is an increase of 12.2% compared with primary membrane.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.