Issue |
E3S Web Conf.
Volume 260, 2021
2021 International Conference on Advanced Energy, Power and Electrical Engineering (AEPEE2021)
|
|
---|---|---|
Article Number | 02007 | |
Number of page(s) | 9 | |
Section | Power Electronics Technology and Application | |
DOI | https://doi.org/10.1051/e3sconf/202126002007 | |
Published online | 19 May 2021 |
The research of configuration for stability control device in smart substation
1 Power Planning and Research Center Yunnan Power Grid Co., Ltd., Kunming, China
2 State Key Laboratory of HVDC, Electric Power Research Institute, China Southern Power Grid, Guangzhou, China
3 Guangdong Provincial Key Laboratory of Intelligent Operation and Control for New Energy Power System, Guangzhou, China
4 CSG Key Laboratory for Power System Simulation, Electric Power Research Institute, China Southern Power Grid, Guangzhou, China
* Corresponding author: hubj@csg.cn
A unified specification to design and operate the stability control device in smart substation has not been formed yet, which has greatly affected the promotion and application of stability control device in smart substation. Thus, referring to the technical specifications of protection device and combining to the specificity of stability control device, a full and detailed configuration scheme is proposed to meet the requirement, including the device configuration principle, the access configuration of SV and GOOSE for variable primary connection types, the virtual terminal and soft switch. This solution is beneficial to standardize the R&D of stability control device in smart substation, and to facilitate on-site debugging, operation and maintenance.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.