Issue |
E3S Web Conf.
Volume 261, 2021
2021 7th International Conference on Energy Materials and Environment Engineering (ICEMEE 2021)
|
|
---|---|---|
Article Number | 04037 | |
Number of page(s) | 4 | |
Section | Environmental Ecological Restoration and Energy Saving, Environmental Protection and Emission Reduction | |
DOI | https://doi.org/10.1051/e3sconf/202126104037 | |
Published online | 21 May 2021 |
Remediation of Mariculture Sediment by Sediment Microbial Fuel Cell
College of Environmental Science and Engineering, Ocean University of China, Qingdao, China
* Corresponding author: 1511879109@qq.com
To investigate the removal effect of pollutants in mariculture sediment by sediment microbial fuel cell (SMFC) and its power generation capacity, the effects of external resistance, cathode pH and cathode dissolved oxygen concentration (DO) on the SMFC system were investigated. The results showed that the optimal parameters for SMFC were as follows: external resistance = 1500 Ω, pH = 8.5 and DO = 5 mg·L-1. In these situations, the power generation performance and organic degradation effect were both the best. The maximum output voltages were 585, 606, and 587 mV, respectively; the removal rates of COD in sediment were 75.51%, 84.21% and 86.63%, respectively; and the removal rates of ammonia nitrogen in sediment were 80.34%, 98.91% and 90.24%, respectively. The SMFC system had a certain degradation ability to pollutants such as COD and ammonia nitrogen in the sediment of the marine aquaculture areas, which had a broad application prospect.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.