Issue |
E3S Web Conf.
Volume 262, 2021
1st International Scientific and Practical Conference “lnnovative Technologies in Environmental Engineering and Agroecosystems” (ITEEA 2021)
|
|
---|---|---|
Article Number | 01035 | |
Number of page(s) | 11 | |
Section | Innovative Technologies, Engineering Systems and Energy in the Agro-industrial Complex | |
DOI | https://doi.org/10.1051/e3sconf/202126201035 | |
Published online | 24 May 2021 |
The calculation basis for a four-component jet mixer for fertilizer and water
1 Novocherkassk Engineering and Meliorative Institute named after A.K. Kortunov – Don State University Branch, Novocherkassk, Russian Federation
2 South Russian State Polytechnic University (NPI) named after M.I. Platonov, Novocherkassk, Russian Federation
* Corresponding author: starasyancz@mail.ru
This article covers calculation basis for a four-component jet mixer for fertilizer and water. The calculation for a four-component jet mixer for fertilizer consists in determining the basic geometric and hydrau-lic parameters of a four-component jet mixer for fertilizer and water and supplying the mixture to irrigated areas, with fertilizing irrigation, which will allow supplying all types of fertilizers and changing the concentration of mixture in the required proportions. All geometric relative parameters are calculated on the basis of the need to scale the mixer dimensions and are taken as the ratio of the diameters of the mixer elements to the cylindri-cal part of the mixing chamber. The above calculation bases determine the main parameter of the mixer necessary for determining all the elements – the cross-sectional area of the annular nozzle. It was founded that when calculating the geometric characteristic, you should be guided by the desire to accept the value of the geometric characteristic m=2.5 ÷ 8.0, corre-sponding to the maximum value of the efficiency up to 40% and higher.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.