| Issue |
E3S Web Conf.
Volume 263, 2021
XXIV International Scientific Conference “Construction the Formation of Living Environment” (FORM-2021)
|
|
|---|---|---|
| Article Number | 02029 | |
| Number of page(s) | 10 | |
| Section | Reliability of Buildings and Constructions and Safety in Construction | |
| DOI | https://doi.org/10.1051/e3sconf/202126302029 | |
| Published online | 28 May 2021 | |
Influence of welding on aluminium alloy AW6082-T6 strength
Moscow State University of Civil Engineering, Yaroslavskoe shosse, 26, Moscow, 129337, Russia
* Corresponding author: jane10.08.98@yandex.ru
Comparison of welding influence on structural strength of Al-Mg-Si alloy (AW6082-T6), supplied with 10 mm thick sheets, is made. Within the research tension and impact tests of welding joints, made with argon-arc and friction stir welding, were carried out. During the research we observed the following: strength and plasticity decrease for welding joint zones, impact strength increase of weld metal in friction stir welding, welding defects influence on joint strength.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.