Specific cost modelling for secondary treatment of wastewater

Moscow State University of Civil Engineering, Yaroslavskoe shosse, 26, Moscow, 129337, Russia

^* Corresponding author: makishana@mgsu.ru

Abstract

The article is devoted to the study of model cost indicators of wastewater treatment facilities as one of the factors for ensuring sustainable development. It is noted that the greatest contribution in terms of cost formation is provided by the stage of biological wastewater treatment. As part of the study, a techno-economic simulation was conducted to compare two technological treatment schemes: conventional activated sludge scheme in aeration reactor and secondary settling tank, and treatment by means of membrane bioreactors. In the course of technological modeling, the concentrations of pollutants after treatment were obtained and compared for each of the schemes, as well as the values of possible harm to water bodies were calculated. Within the framework of cost modeling, capital and operating costs were obtained for the two variants, and key differences in their formation were analyzed. It is noted that the classical cleaning scheme requires the construction of a larger volume of structures, while for schemes with a membrane bioreactor, a significant cost item is the purchase of the actual membrane modules, but as the system performance increases, the share of these costs decreases.