Issue |
E3S Web Conf.
Volume 264, 2021
International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2021)
|
|
---|---|---|
Article Number | 01020 | |
Number of page(s) | 10 | |
Section | Ecology, Hydropower Engineering and Modeling of Physical Processes | |
DOI | https://doi.org/10.1051/e3sconf/202126401020 | |
Published online | 02 June 2021 |
Sizes of the actively aerated zone and methods of the jet aerator calculation
1 Tashkent Institute of Irrigation and Agricultural Mechanization Engineers, Tashkent, Uzbekistan
2 Tashkent State Transport University, Tashkent, Uzbekistan
* Corresponding author: m.radkevich@tiiame.uz
The possibilities of using jet aeration for biological wastewater treatment in small facilities were considered in the article. In shallow depth reservoirs, studies were carried out to change the sizes of the actively aerated zone with a decrease in the height of the liquid layer in the reservoir. The research was conducted for jet aerators with nozzles of the "keyway" type holes. It was established that a decrease in the relative depth of the reservoir makes it possible to increase the share of the beneficial use of the reservoir volume. This suggests that jet aeration will be most effective for reservoirs of relatively shallow depth. Based on the research results, a method for calculating a jet aerator was proposed, which makes it possible to evaluate the necessary parameters of the aerator based on the determination of the volumetric mass transfer coefficient.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.