Method for calculating the insulation of airborne sound by enclose from volumetric-block buildings

¹ Tashkent State Transport University, Tashkent, Uzbekistan
² Tashkent Institute of Architecture and Civil Engineering, Tashkent, Uzbekistan
³ Tashkent Institute of Irrigation and Agricultural Mechanization Engineers, Tashkent, Uzbekistan

^* Corresponding author: prx55@mail.ru

Abstract

This research paper provides a method for calculating airborne sound insulation by encloses from volumetric-block buildings. The choice of the most suitable construction solution for the technical condition of objects at the design stage for building elements should primarily provide insulation from sound and a safe mode inside buildings, in which protection conditions in the combination of energy efficiency and stability should be taken into account, as well as competent decisions and its impact on the construction process buildings.

Numerous scientific studies show the negative effect of sound on human health by the occurrence of various diseases such as cognitive impairment of the fetus in reproductive people, sleep disturbances, tinnitus, irritation, and dysfunction of some human organs. Therefore, sound exposure should be considered a source of inconvenience and a source of harm to human health.

Sound waves collide with the surfaces of enclosing structures, causing them to vibrate and transmit the negative effects of the air around them in adjoining rooms, in which, from the point of view of regulatory requirements, in many cases, it does not meet the requirements, since comfort also depends on the design and sound insulation of the volumetric-block buildings.

Many of these problems are easily solved at the design stage by choosing the right design solution and calculating the soundproofing qualities of the enclosing structures.

In particular, one of the main tasks at the design stage is the development of structural solutions for internal enclosing structures that have a relatively small mass that allows reducing the load on the supporting structures of the building and plummets the material consumption of construction. At the same time, it is necessary to ensure compliance with the regulatory requirements for the isolation of airborne sound of enclosing structures.