E3S Web Conf.
Volume 264, 2021International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2021)
|Number of page(s)||8|
|Section||Hydraulics of Structures, Hydraulic Engineering and Land Reclamation Construction|
|Published online||02 June 2021|
Initial results of watering plants via sub-irrigation technology
Tashkent Institute of Irrigation and Agricultural Mechanization Engineers, Tashkent, Uzbekistan
* Corresponding author: firstname.lastname@example.org
In this developing world, saving water is the main problem for agricultural sciences. So, in this field, scientists are using many methods to save water-for instance, traditional irrigation, drip irrigation, sprinkler irrigation, sub-irrigation, and others. Solving irrigation and the problems in this article demonstrated the sub-irrigation method for agriculture plants in the Uzbekistan regions. According to watering theory in the field condition and compared to drip irrigation in the region, scientifically experiment was done. According to the results of the study, this method will automate the stability of soil moisture in the irrigation of agricultural crops: save 4 … 5 times water and prevent soil salinization; the cost of processing plants and fuels and lubricants with the help of technical means is sharply reduced; land use coefficient increases; hardening of crop rows and the number of their processing is sharply reduced; it is guaranteed to increase crop yields by mixing the juice with water; environmental pollution and soil salinity are sharply reduced. In the case of drip irrigation of agricultural crops, flexible plastic pipes with a diameter of 16… 20 mm are laid on the soil near the crop stalks, from which water holes or cracks are formed at certain intervals, from which water drips and irrigates crops. It is also possible to mix the juice of chemical and local fertilizers with water.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.