Issue |
E3S Web Conf.
Volume 264, 2021
International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2021)
|
|
---|---|---|
Article Number | 04014 | |
Number of page(s) | 9 | |
Section | Mechanization, Electrification of Agriculture and Renewable Energy Sources | |
DOI | https://doi.org/10.1051/e3sconf/202126404014 | |
Published online | 02 June 2021 |
Universal contactless converters of monitoring and control systems in water power industry
1 Tashkent institute of irrigation and agricultural mechanization engineers, Tashkent, Uzbekistan
2 Triple Point Engineering LLC, Tashkent, Uzbekistan
* Corresponding author: a.plakhtiev@mail.ru
The paper substantiates the need to use non-contact conversion and measurement of large direct currents using non-destructive magneto modulation non-contact ferromagnetic transducers of increased sensitivity for the needs of land reclamation, irrigation, industry, metallurgy and, in general, agriculture and water management; the results of their design development are presented. It is shown that the developed converter, in contrast to the known ones, has increased accuracy and sensitivity, a technologically advanced design and small weight and dimensions with low material consumption and cost. The issues of reliability of magnetic modulation contactless converters are considered. The results of their research have been obtained. It is shown that the reliability of wide-range magneto modulation contactless converters of large direct currents is equal to 0.998 and taking into account catastrophic failures, their total reliability is 0.9969. The developed converter can be widely used in electrical systems in land reclamation and irrigation, in water supply, industry, railway transport, science, technology and for checking electrical meters at their installation site.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.