| Issue |
E3S Web Conf.
Volume 264, 2021
International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2021)
|
|
|---|---|---|
| Article Number | 04093 | |
| Number of page(s) | 10 | |
| Section | Mechanization, Electrification of Agriculture and Renewable Energy Sources | |
| DOI | https://doi.org/10.1051/e3sconf/202126404093 | |
| Published online | 02 June 2021 | |
Experimental study of crushing process of the crushed stone
1 Bukhara Engineering Technological Institute, Bukhara, Uzbekistan
2 Bukhara State University, Bukhara, Uzbekistan
* Corresponding author: nigisha.s@mail.ru
Currently, crushers operating in a central impact manner have become widely used, which has several advantages over roller, cone, and cheek crushers. The present work shows the device and principle of a laboratory centrifugal vertical impact crusher for studying the process of crushing local gravel to obtain crushed stone with dimensions of 5-20 mm. The main influencing factors for the process are the average size of the incoming raw materials, the rotation speed of the crusher rotor, and the distance between the accelerator and the annular platform. The output parameter is the concentration of crushed stone with a size of 5-20 mm in the output (%). A full factor experiment N=23 was conducted, a regression equation was obtained, the adequacy of this model was proved by methods of mathematical statistics. It is determined that an increase in the size of the input raw material reduces the percentage ratio of the crushed stone output with dimensions of 5-20 mm, and an increase in the rotation speed of the crusher rotor, on the contrary, contributes to an increase in the crushed stone output. Using this equation, you can determine the degree of influence of each factor under investigation on the final result, which is necessary to optimize the process.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.