Issue |
E3S Web Conf.
Volume 268, 2021
2020 6th International Symposium on Vehicle Emission Supervision and Environment Protection (VESEP2020)
|
|
---|---|---|
Article Number | 01007 | |
Number of page(s) | 14 | |
DOI | https://doi.org/10.1051/e3sconf/202126801007 | |
Published online | 11 June 2021 |
Remote supervision strategy based on in-use vehicle OBD data flow
1 School of mechanical and electrical engineering and vehicle engineering, East China Jiaotong University, Nanchang 330100, China
2 Power transmission development department, Jiangling Automobile Co., Ltd., Nanchang 330100, China
3 AVL List Technical Center (Shanghai) Co., Ltd., Shanghai 201206, China
* Corresponding author: wtt31@126.com
Test results from many researchers show that NOx emissions from parts of on-road heavy-duty diesels are higher than which been registered. Therefore, CN_VI emission regulations clearly proposes that the heavy-duty diesels should be supervised by a T-BOX which can transmit CAN message from vehicle OBD interface to the remote monitoring platform. Recognition of cheating behaver and calculation method of NOx emission were developed and verified by platform data from on-line vehicle. The modules in the platform can effectively monitor urea consumption rationality, injection system working state, exhaust temperature sensor signal reasonability, NOx sensor signal reasonability and NOx emission level, which can reduce the cost of supervision and governance, improve the effectiveness of regulation and provide basic data for policy making.
Key words: OBD / remote monitoring / platform / diagnosis / emission
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.