E3S Web Conf.
Volume 273, 2021XIV International Scientific and Practical Conference “State and Prospects for the Development of Agribusiness - INTERAGROMASH 2021”
|Number of page(s)||9|
|Published online||22 June 2021|
Optimal electroacoustic coating modes investigation for production of nanostructured materials
Don State Technical University, Gagarin sq. 1, 344003 Rostov-on-Don, Russia
* Corresponding author: firstname.lastname@example.org
Described the research results of hardening coatings coating modes influence on the microstructure of the surface layer of machine parts. Electroacoustic coating was used as a coating method. X-ray structural analysis and electron microscopy were used to investigate the microstructure of the coatings. The results obtained can be used to determine the optimal technological modes of coating.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.