| Issue |
E3S Web Conf.
Volume 276, 2021
2021 5th International Conference on Water Conservancy, Hydropower and Building Engineering (WCHBE 2021)
|
|
|---|---|---|
| Article Number | 01030 | |
| Number of page(s) | 5 | |
| Section | Water Conservancy and Hydropower and Natural Geological Exploration | |
| DOI | https://doi.org/10.1051/e3sconf/202127601030 | |
| Published online | 23 June 2021 | |
Application of FME Deterministic Model in the Calculation of a Reservoir Arch Dam
1 Zhejiang Design Institute of Water Conservancy and Hydroelectric Power, Hangzhou Zhejiang 310002, China
2 Zhejiang Guang Chuan Engineering Consulting Co., LTD, Zhejiang Hangzhou 310020, China
3 Zhejiang Provincial Key Laboratory of Water Resources Disaster Prevention and Mitigation, Zhejiang Hangzhou 310020, China
a Corresponding author's e-mail: 632666121@qq.com
At present, the analysis of monitoring data for the stress of dam is mostly based on statistical models. However, the monitoring data of the stress on some arch dams have considerably large error, it is hard to build a reasonable statistic model based on the monitoring data. In order to solve the practical application problem of the project, this paper calculates the elastic modulus of the dam by using finite element analysis based on the displacement of the hydraulic component separated from the statistical model of horizontal displacement. Then according to the reversed elastic modulus, this paper has calculated the dam stress under different water levels and temperature conditions. Finally, it has built a stress-deterministic model of the dam.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.