Modernization of Mining Scheme in Developing Peat Deposit

Tver State Technical University, A. Nikitin Street 22, 170026, Tver, Russia

Abstract

The article presents the results of the study of a peat deposit development scheme with improved spread parameters. The parameters are improved by forming the spread as moulded particles of a certain shape and size determined by the size of moulding machine grooves and the degree of peat relaxation. To obtain such particles a milling cutter is proposed to be replaced by a moulding mill at the stage of peat deposit milling. When excavated, the peat mass is loosened and fed into a roller moulding machine where the rollers, rotating in opposite directions, capture it and the peat is compressed. The loose structure changes into dense particle-particle packing. The circumferential speeds of roller rotations are equal. A trapezoidal groove profile is chosen for the moulded particles to leave it. The groove depth is 10 mm. The uniformity of the moulded enlarged particle distribution over a drying field is characterized by a spread variation coefficient, which allows the spread quality to be evaluated. The enlarged particle spread is normalized by some cumulative actions characterizing the spread by parameters (the thickness, the average particle size, the size uniformity, the number of layers). Therefore, the drying of enlarged particles is intensified and peat yield per unit area is increased.