| Issue |
E3S Web Conf.
Volume 279, 2021
III International Conference “Energy Efficiency and Energy Saving in Technical Systems” (EEESTS-2021)
|
|
|---|---|---|
| Article Number | 01027 | |
| Number of page(s) | 8 | |
| Section | Modern Energy Efficient Automation Technology | |
| DOI | https://doi.org/10.1051/e3sconf/202127901027 | |
| Published online | 01 July 2021 | |
Method for effective monitoring and control of the positioning of the output link of the mechatronic module
Don state technical University, Rostov-on-Don, Russia
This article is devoted to the problem of linear positioning of the output link of a mechatronic module (MM), made on the basis of a ball screw (ball screw). The analysis of typical schemes for constructing an MM controller using signals from radial position sensors of the ball screw rotor and a discrete indicator of the linear position of the output link in the working stroke section with the possibility of implementing an emergency (emergency) power off of the entire positioning system in the event of the output link extending beyond the working stroke. An optimal technical solution is proposed for constructing a linear positioning sensor of the output link based on combining the functions of the “referent points” indicator and the “limit switch” MM. Тhe cost-effectiveness of the new
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.