| Issue |
E3S Web Conf.
Volume 280, 2021
Second International Conference on Sustainable Futures: Environmental, Technological, Social and Economic Matters (ICSF 2021)
|
|
|---|---|---|
| Article Number | 01004 | |
| Number of page(s) | 8 | |
| Section | Geotechnical and Geoenvironmental Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202128001004 | |
| Published online | 30 June 2021 | |
Modeling the distribution of rock mass and native copper output by size classes during crushing
1 National University of Water and Environmental Engineering, 11 Soborna Str., Rivne, 33028, Ukraine
2 Satbayev University, 22 Satpaev Str., Almaty, 050013, Kazakhstan
3 Kyrgyz State University of Geology, Mining, and Natural Resources Development named after Academician U. Asanaliev, 215 Chui Ave., Bishkek, Kyrgyz Republic
* Corresponding author: kvja@i.ua
The article considers the features of the distribution of technological indicators (product output, content and extraction of copper) by size classes, the main factors influencing the crushing process are identified and regression dependences of productivity on influencing factors are received. The parabolic nature of the dependences of the output of crushed rock on the size class is established. The high adequacy of the obtained models was confirmed and the most promising classes of rock size for copper extraction were determined. The obtained results and models will allow to develop a generalized model of the process of native copper mining and to implement this process with rational and optimal parameters. Also, the received models will allow to carry out an estimation of productivity of a research site of processing of raw materials of basalt quarries.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.