Issue |
E3S Web Conf.
Volume 280, 2021
Second International Conference on Sustainable Futures: Environmental, Technological, Social and Economic Matters (ICSF 2021)
|
|
---|---|---|
Article Number | 03002 | |
Number of page(s) | 6 | |
Section | Sustainable Building and Architecture | |
DOI | https://doi.org/10.1051/e3sconf/202128003002 | |
Published online | 30 June 2021 |
Computational aerodynamics in architectural siting of the structures of agro-industrial complex
1 ETUAL LLC, 1 Bortnytska, Petropavlivske, 08341, Ukraine
2 National Aviation University, Department of Computer Technology Construction, 1 Liubomyra Huzara Ave., Kyiv, 03058, Ukraine
* Corresponding author: pasargada1985@gmail.com
The article presents study of wind effect on silo parks, which was carried out by computer simulation methods. A special modeling technique was created as a software module for the Ansys Workbench platform. A finite element mesh was developed in accordance with two requirements. Through the use of this mesh, which doesn’t contain needless elements which can be used for simplification of calculations and reduction of execution time, it is possible to describe the turbulent airflow in sufficient detail. The dimensions of all mesh elements are determined by special relations as the functions of the silo diameter and the Reynolds number. The major stage in this investigation was modeling of various options for flowing silos and their groups. As a result of the study, we have obtained aerodynamic characteristics of individual silos as part of silo parks and plotted charts of the distribution of pressure coefficients over the cylinder surface, changing the size of the silos, distances between them and local wind regime. Based on these data, we have drawn a conclusion about the optimal space planning locations of silos for different wind directions. Visualizations of turbulent flow around models at different speeds have also been obtained in this study.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.