Issue |
E3S Web Conf.
Volume 280, 2021
Second International Conference on Sustainable Futures: Environmental, Technological, Social and Economic Matters (ICSF 2021)
|
|
---|---|---|
Article Number | 08009 | |
Number of page(s) | 7 | |
Section | Sustainable Mining | |
DOI | https://doi.org/10.1051/e3sconf/202128008009 | |
Published online | 30 June 2021 |
The use of the construction with a digital camera and GPS receiver while researching dangerous areas
1 Kryvyi Rih National University, Department of Mine Surveying, 11 Matusevycha Ave., Kryvyi Rih, 50027, Ukraine
2 RŐSSLER engineering surveying GmbH GEON group of companies, Wiesestraẞe 6, D-07548 Gera, Germany
3 Belaruskali, Korzha 5, Soligorsk, Respublika Belarus
* Corresponding author: dlavgeod@gmail.com
The purpose of the study is to select an effective methods and equipment for observing deformations in dangerous areas of the terrain, such as areas that are undermined by underground mining. It is known that the topical task of the mine surveying service is to improve remote sensing methods for the state of movement zones with craters, dips, cracks. The research methodology is based on the results of the performed analysis of methods for observing deformations using modern devices and technologies, and experimental work using the developed methodology, which provides for the combined use of digital methods and GPS technologies. Experimental work was carried out at the facilities of the Ordzhonikidze mine using various remote sensing methods, including those developed by the authors. The research used a design consisting of a digital camera and a GPS receiver. The performed analysis of the obtained survey results, using the proposed design of two devices, has shown its effectiveness in remote methods of observing the objects deformations located in areas undermined by mining operations. The scientific novelty of the results obtained lies in the methods development for remote observation of deformations of the ground's surface and objects, based on the structure use from a digital camera and a GPS receiver. This method was developed to increase the efficiency of performing research on objects deformations located in places that are dangerous for finding a person. The efficiency of using terrestrial digital stereo survey when the coordinates of the photographing points are determined with the help of GPS has been proved. The practical significance of the study lies in increasing work efficiency the on monitoring deformations of the earth's surface, buildings and structures located in areas dangerous for field work by traditional methods, which are performed using leveling and measuring the distances between the benchmarks of profile lines, which are usually used on areas undermined by underground mining. The use of terrestrial digital stereo photography with the coordination of photographing stations using GPS allows remote determination of the spatial position of the observed points with the required accuracy. Key words: ground stereoscopic survey, collapse zone, digital camera, GPS.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.