Issue |
E3S Web Conf.
Volume 281, 2021
IV International Scientific Conference “Construction and Architecture: Theory and Practice of Innovative Development” (CATPID-2021 Part 1)
|
|
---|---|---|
Article Number | 01012 | |
Number of page(s) | 6 | |
Section | Structural Mechanics and Structural Theory, Civil and Industrial Construction | |
DOI | https://doi.org/10.1051/e3sconf/202128101012 | |
Published online | 02 July 2021 |
Partial prestressing as a method of equal-strength structures bending approaching
Kabardino-Balkarian State University, 360004, Nalchik, Russia
* Corresponding author: Valeriy-archi@mail.ru
The use of partial prestressing as a way to save materials in building structures is observed in the article. The redesign of a typical prestressed reinforced concrete rafter beam with a span of 12 m with parallel belts, in which partial prestressing was applied, made it possible to reduce the main working high-tensile reinforcement consumption by more than 30% and increase the high-tensile reinforcement using efficiency from 0.58 to 0.74.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.