| Issue |
E3S Web Conf.
Volume 281, 2021
IV International Scientific Conference “Construction and Architecture: Theory and Practice of Innovative Development” (CATPID-2021 Part 1)
|
|
|---|---|---|
| Article Number | 05001 | |
| Number of page(s) | 6 | |
| Section | Organization and Technology of Construction Production. Geodesy, Cartography and Photogrammetry | |
| DOI | https://doi.org/10.1051/e3sconf/202128105001 | |
| Published online | 02 July 2021 | |
Optimization of the engineering surveys geodetic coordinate frame based on the Mercator projection use
Hanoi University of Natural Resources and Environment Branch in Thanh Hoa Province, Vietnam
* Corresponding author: sonphuong85@mail.ru
The article proposes the use of a geodetic coordinate frame suitable for the reference plan geodetic networks of Vietnam used in engineering surveys. This framework minimizes distortion in horizontal spacing when going from ellipsoid to plane. In the course of the work, the parameters of the coordinate system and the height of the level surface were selected using the Universal Transverse Mercator (UTM). The equations used for the calculations are determined based on theoretical analysis and are easily applied in surveying.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.