E3S Web Conf.
Volume 284, 2021Topical Problems of Green Architecture, Civil and Environmental Engineering (TPACEE-2021)
|Number of page(s)||11|
|Section||Energy Efficiency in Construction|
|Published online||12 July 2021|
Effect of activated sealant water on strength of cement samples
1 Moscow State University of Civil Engineering, 26, Yaroslavskoe shosse, 129337, Moscow, Russia
2 National Research Mordovia State University, MRSU, 68, Bolshevistskaya str., 430005, Saransk, Republic of Mordovia
* Corresponding author: email@example.com
The article presents the results of optimization of the cement composition according to the criteria of compressive strength and bending by methods of mathematical planning of the experiment. As a result of the studies, cement compositions of increased strength were obtained using activated closure water, as well as using tandem activated water (AB) + plasticizer and AB + adhesive additive. At optimal content of components, strength gain of up to 18% is achieved.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.