Issue |
E3S Web Conf.
Volume 285, 2021
International Conference on Advances in Agrobusiness and Biotechnology Research (ABR 2021)
|
|
---|---|---|
Article Number | 05013 | |
Number of page(s) | 5 | |
Section | Food Technologies | |
DOI | https://doi.org/10.1051/e3sconf/202128505013 | |
Published online | 06 July 2021 |
The use of a food additive based on Stevia Rebaudiana Bertoni components in the production of confectionery
Technological Department, Ryazan State Agrotechnological University Named after P.A. Kostychev, 1, Kostychev Str., Ryazan, 390044, Russia
* Corresponding author: katya.lilu@mail.ru
The article proposes an analysis of research work on the use of a food additive based on the components of Stevia Rebaudiana Bertoni plant in the production of a confectionery product. The substitution of sugar with sweetener “Stevioside” in the amount of 10 % and 30 % did not significant-ly affect the organoleptic characteristics of the finished product, however, at 50 % substitution, a mild bitter taste and herbal odor were observed, which was inherent in this sweetener at high concentra-tions. There were also bursts of the biscuit semi-finished product and its greater crumbling at 50 % substitution. According to the results of the work, the production of a roll with 30 % sweetener “Ste-vioside” was the most optimal one. The introduction of a sweetener did not in any way affect such in-dicators as the layer thickness, moisture content, and dry matter content. All of them corresponded to GOST 14621-78. Based on the experiments carried out, it is recommended to substitute sugar with sweetener “Stevioside” in the amount of 30 % when producing “Spring” roll, as this allows to increase the amount of the product produced by reducing the technological process and will increase the level of profitability.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.