Design and technological aspects of spiked cereal combine stripping

Kuban State Agrarian University named after I.T. Trubilin, 13, Kalinina St., Krasnodar, 350044, Russia

^* Corresponding author: elena_yudina1963@mail.ru

Abstract

The article proposes system research of the spiked cereals harvesting process by a combine stripping, when the stripping header and the grain heap clearing are performed by one harvesting unit based on a self-propelled all-wheel drive combine harvester with a modernized design and technological scheme, in contrast to their aggregation by conventional batch-produced harvesters, which do not provide the harvesting quality according to the agrotechnical requirements. The commonly used aggregation of high-performance stripper headers by series combine harvesters, does not give an effect from the technology of combine stripping due to such violations of agrotechnical requirements as grain crushing for up to 1,9 %, its direct losses off the combine for up to 1,5 %, high kernel micro-damage, etc. With the use of a system approach, the design and technological aspects of spiked cereal combine stripping have been proposed, the use of which will eliminate the disadvantages of the used combine stripping while maintaining the high achievements of this technology in increasing labor productivity by 1,4 ... 2,0 times and saving diesel fuel for up to 45 %. In the principles of improving the technology by combine stripping, proposed by the authors, the requirements for its subsystems are given, indicating the main parameters of the stripping header and the combine harvester that aggregates it for clearing an unwinnowed grain heap. The proposed approach will enable to accelerate the spiked cereal stripping technology implementation with a high increase in the harvesting unit performance by 1,4 ... 2,0 times and with a fuel economy for up to 45 %.