E3S Web Conf.
Volume 288, 2021International Symposium “Sustainable Energy and Power Engineering 2021” (SUSE-2021)
|Number of page(s)||8|
|Published online||14 July 2021|
The Necessity of Application of Frequency Electric Drives for Irrigation Systems
National Joint Stock Company Toraigyrov University, Pavlodar, Republic of Kazakhstan
The article substantiates the possibility of using frequency drives in agricultural production, shows promising areas of their application, shows the positive qualities of frequency drives, which make it possible to confidently compete with gear drives that are widespread in agriculture. It is indicated that the use of a frequency electric drive can reduce the current and mechanical loads due to soft start. Due to the additional control inputs of the frequency converter, it is possible to synchronize the processes on the load or set the change factors for some values depending on others. For example, to establish the dependence of the speed of the irrigation pumping system on the pressure in the system. The process will be optimized because as the load on the pump increases, the flow will increase. Recommendations are given on the choice of the power of the frequency converter, taking into account the rated currents and voltage of the converter and the motor. Recommendations are given on the choice of the power of the frequency converter, taking into account the rated currents and voltage of the converter and the motor. The advantages of starting and braking electric drives with frequency regulation are shown.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.