E3S Web Conf.
Volume 288, 2021International Symposium “Sustainable Energy and Power Engineering 2021” (SUSE-2021)
|Number of page(s)||6|
|Published online||14 July 2021|
Forecasting the quality of mineral oils during oil refining according to the fuel and oil flow chart at Atyrau Refinery
Industrial and Process Faculty, Atyrau University of Oil and Gas, Atyrau, Kazakhstan
* Corresponding author: A.Bukanova@aogu.edu.kz
The article discusses the problem of rational oil refining at Atyrau Refinery. Based on a detailed study of the properties of low-sulfur oils of Kazakhstan, in order to assess the potential for the selection of petroleum oils, effective refining methods with modern technologies are shown. A graph is given that allows us to assess the raw mate-rial potential of the Republic of Kazakhstan for lube fractions of oil. The potential reserve of the considered deposits can fully meet the needs of the Republic in oils. The physical and chemical properties of crude oil sup-plied to Atyrau refinery, with a view to their use as raw materi-als for the oil refining and production. The results of experiments on hydrocracking of the plant’s vacuum gasoil are also presented, indicating that this refining option allows you to obtain not only light distillates (gasoline and diesel fuel), but also excellent base oils. This can significantly advance the oil refining in the enterprise as a whole. On the basis of experimental studies, the correlation dependence of the viscosity index on the hydrocarbon-type composition of oils was revealed, which allows predicting the quality of the resulting product.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.