| Issue |
E3S Web Conf.
Volume 290, 2021
2021 3rd International Conference on Geoscience and Environmental Chemistry (ICGEC 2021)
|
|
|---|---|---|
| Article Number | 03029 | |
| Number of page(s) | 5 | |
| Section | Environmental Energy Protection and Energy-Saving Sustainability | |
| DOI | https://doi.org/10.1051/e3sconf/202129003029 | |
| Published online | 14 July 2021 | |
Study on Coupling Effect of Additives on NOx Control in Coal Pyrolysis-Combustion
1 State Key Laboratory of Clean and Efficient Coal Utilization, Taiyuan University of Technology, Taiyuan 030024, Shanxi, China
2 College of Chemistry and Chemical Engineering, Taiyuan University of Technology, Taiyuan 030024, Shanxi, China
3 Shanxi Engineering Center of Civil Clean Fuel, Taiyuan University of Technology, Taiyuan 030024, Shanxi, China
* Corresponding author:shanggj62@163.com
A large amount of nitrogen oxides produced by loose coal combustion has an important impact on the ecological environment. To solve this problem, it is proposed to prepare clean coke instead of loose coal combustion to reduce the emission of nitrogen oxides from civil coal combustion. Clean coke is prepared by pyrolysis raw coal adding additives, and the gas generated by pyrolysis is collected uniformly, thus avoiding the emission problem in the process of loose burning. In addition, the clean fuel catalyzes the reduction of nitrogen oxides to produce N2 in the combustion process, thus reducing the emission of combustion nitrogen oxides. In this paper, the additives were investigated, and finally it was found that loading 1 wt.% Fe and Ni had a better effect of decrease nitrogen content in coke through pyrolysis of coal and denitrification during the combustion of coke, and had a coupling effect on nitrogen oxide control in the pyrolysis-combustion process.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.