Issue |
E3S Web Conf.
Volume 293, 2021
2021 3rd Global Conference on Ecological Environment and Civil Engineering (GCEECE 2021)
|
|
---|---|---|
Article Number | 02009 | |
Number of page(s) | 5 | |
Section | Environmental Energy and Civil Engineering and Water Conservancy Construction | |
DOI | https://doi.org/10.1051/e3sconf/202129302009 | |
Published online | 23 July 2021 |
Research on the influence of boulder powder content on concrete performance
China Road and Bridge Co., Beijing 100011, China
* Corresponding author: menggc@crbc.com
To solve the problem of environmental pollution caused by the accumulation of granite powder and the shortage of traditional mineral admixtures, the influence of the amount of granite powder on the mechanical properties of concrete was studied by replacing cement with different amount of granite powder Different amount of granite powder can be used to prepare concrete with satisfactory performance. When the amount of granite powder is small (not more than 5%), granite powder will not reduce the compressive strength of concrete, or even slightly improve the compressive strength of pure cement concrete. When the amount of granite powder is more than 5%, the compressive strength of concrete will gradually decrease; when the amount of granite powder is more than 5%, the compressive strength of concrete will gradually decrease. The elastic modulus of concrete decreased, and the electric flux increased with the increase of the amount of admixture.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.