Issue |
E3S Web Conf.
Volume 294, 2021
2021 6th International Conference on Sustainable and Renewable Energy Engineering (ICSREE 2021)
|
|
---|---|---|
Article Number | 01004 | |
Number of page(s) | 5 | |
Section | Renewable Energy and Application | |
DOI | https://doi.org/10.1051/e3sconf/202129401004 | |
Published online | 26 July 2021 |
A Review – Renewable energy based micro-cogeneration and hybrid energy systems
INSA Strasbourg ICUBE Strasbourg University, France
* Corresponding author: sonja.kallio@insa-strasbourg.fr
To reduce carbon and greenhouse gas emissions, the more efficient and environmentally friendly energy production in the building sector is required. The deployment of renewable energy based microcogeneration units in the decentralized hybrid energy systems is a part of the solution. The micro combined heat and power (micro-CHP), or co-generation, units produce simultaneously heat and electricity from a single fuel source at high efficiency and close to the consumption point. These units offer significant benefits: reduced primary energy consumption, reduced CO2 emissions, and avoidance of distribution losses due to central plant and network construction. The objective of this paper is to present a review of available renewable energy based micro-CHP systems and to focus on the biomass and solar based conversion devices. Finally, a novel hybrid renewable energy system is presented by coupling renewable energy sources, such as solar and biomass for micro-CHP.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.