Issue |
E3S Web Conf.
Volume 297, 2021
The 4th International Conference of Computer Science and Renewable Energies (ICCSRE'2021)
|
|
---|---|---|
Article Number | 01002 | |
Number of page(s) | 5 | |
DOI | https://doi.org/10.1051/e3sconf/202129701002 | |
Published online | 22 September 2021 |
Simulation and experimental study of novel cascade solar still
Laboratoire de Mécanique Appliquée et Technologies Centre de Recherche en Sciences et Technologies Industrielles et de la Santé ENSAM, Mohammed V University in RABAT Avenue de l’Armée Royale, BP 6207 Rabat-Instituts, Morocco
In this paper, a new design of inclined solar still with steppe absorber plate, slope surfaces and baffles were proposed, fabricated, tested and modeled using ANSYS FLUENT software, in order to develop the simple and the cheapest type of desalination. The simulation has been carried out and validated with experimental data for climate conditions of Rabat-Morocco (34°47’N) obtained from our existing prototype. It has been found that the simulation results are in good agreement with the experimental data. It was also examined that the productivity of the cascade Solar Still was higher from 12:00 to 15:00 hrs. The results indicate that the new design ensures higher productivity.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.