| Issue |
E3S Web Conf.
Volume 303, 2021
The 10th Anniversary Russian-Chinese Symposium “Clean Coal Technologies: Mining, Processing, Safety, and Ecology” 2021
|
|
|---|---|---|
| Article Number | 01011 | |
| Number of page(s) | 7 | |
| DOI | https://doi.org/10.1051/e3sconf/202130301011 | |
| Published online | 17 September 2021 | |
Emission of gases from coal at low-temperature oxidation depending on the oxygen sorption rate
1 T.F. Gorbachev Kuzbass State Technical University, 650000, Russian Federation
2 Institute for Arid Ecology and Environment, Center for Underground Coal Fire, Xinjiang University Add.: No.666 Shengli Road, Urumqi city 830091, Xinjiang region, China
Coal oxidation by air oxygen can cause a process of spontaneous combustion with intense emission of carbon oxide and danger to initiate explosion of combustible gases. To detect the process of coal spontaneous combustion in mines, they use a gas analysis method providing control of concentrations of carbon oxide, hydrogen and hydrocarbons in the atmosphere. The conducted researches showed that at low-temperature oxidation of coal the intense emission of these gases without temperature increase is possible. Concentration of carbon oxide significantly increases with the growth of coal oxygen sorption rate. Ethylene and carbon dioxide show similar regularities. Acetylene is not found as a result of low-temperature oxidation of coal, and emission of hydrogen, methane, ethane, propane and propylene does not depend on the coal oxygen sorption rate.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.