| Issue |
E3S Web Conf.
Volume 303, 2021
The 10th Anniversary Russian-Chinese Symposium “Clean Coal Technologies: Mining, Processing, Safety, and Ecology” 2021
|
|
|---|---|---|
| Article Number | 01017 | |
| Number of page(s) | 8 | |
| DOI | https://doi.org/10.1051/e3sconf/202130301017 | |
| Published online | 17 September 2021 | |
Improvement of production control of coal mining enterprises with underground mining method
1 T. F. Gorbachev Kuzbass State Technical University, 650000 Kemerovo, 28 Vesennyaya st., Russian Federation
2 T.F. Gorbachev Kuzbass State Technical University, Branch in Prokopyevsk 653049, Prokopyevsk, 19a Nogradskaya str., Kemerovo Region – Kuzbass, Russian Federation
* Corresponding author: kta.bua@kuzstu.ru
Production safety is one of the problems of competitiveness of underground mining enterprises, one manifestation of which is the reduction and minimization of the number of accidents and incidents of personal injury or even death. To solve this problem, it is necessary to improve the system of production control of coal mines in order to eliminate these factors. Relative indicators of accidents and injuries at underground coal mines of Russia in comparison with the average indicators are considered, and also importance of the human factor in the occurrence of dangerous production situations and the evaluation of their causes and effects are revealed. In addition, the article considers the most common violations of safety requirements for underground coal mining, analyzes the experience of foreign countries in improving the production control system, assesses the possibility of its application for improving production control at Russian coal mines, and determines main areas for implementing a risk-based approach at coal mining enterprises.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.