Issue |
E3S Web Conf.
Volume 304, 2021
2nd International Conference on Energetics, Civil and Agricultural Engineering (ICECAE 2021)
|
|
---|---|---|
Article Number | 02003 | |
Number of page(s) | 7 | |
Section | Civil Engineering | |
DOI | https://doi.org/10.1051/e3sconf/202130402003 | |
Published online | 21 September 2021 |
Study of the Form of Minerals in Copper Porphyry Ores of “Yoshlik-I” Deposit
Department of Mining and Metallurgy, Tashkent State Technical University, 100095 Tashkent, Uzbekistan
* Corresponding author: sohibtm@gmail.com
The purpose of these studies is to study the forms of finding copper-porphyry ores of the Yoshlik I deposit compared with the Kalmakyr deposit data and to decide on the choice of a cost-effective ore processing technology. As a result of the studies, it was revealed that ore mineralization is represented by sulfides of various metals and iron oxides. The primary sulfides are pyrite and chalcopyrite. In the «Yoshlik-I» sample, the pyrite content is six times less than in the Kalmakyr sample and is 0.7%. The mass fraction of chalcopyrite in the Kalmakyr and “Yoshlik-I” deposits is 1.1 and 0.8%, respectively. The remaining sulfides of various metals and the minerals of these ribs are present in several single signs. According to the content of cell fids, the Kalmakyr ore sample is characterized by a small-sulfide ore; the «Yoshlik-I» ore sample is a slab-sulfide type ore. According to the oxidation state calculated by iron, ore samples of the Kalmakyr and «Yoshlik-I» deposits belong to the mixed variety of ores.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.