Issue |
E3S Web Conf.
Volume 304, 2021
2nd International Conference on Energetics, Civil and Agricultural Engineering (ICECAE 2021)
|
|
---|---|---|
Article Number | 03029 | |
Number of page(s) | 11 | |
Section | Agricultural Engineering | |
DOI | https://doi.org/10.1051/e3sconf/202130403029 | |
Published online | 21 September 2021 |
Development of the saw cylinder for gins and linters with use of new elements of the design
1 “Bukhara agroklaster” LLC, 200103 Bukhara, Uzbekistan
2 Tashkent Institute of Textile and Light Industry, 100100 Tashkent, Uzbekistan
* Corresponding author: agzamov85@mail.ru
Article issues of decrease in amplitude of dynamic fluctuations of saw cylinders of gins and linter for the purpose of reduction of a deviation of saws from the plane of rotation and contact with saws of grates are consecrated. Mathematical models for calculation of flexural fluctuations of a shaft of a saw cylinder, taking into account intensity of placement of the mass moments of inertia, a technique of the solution of the equation of flexural fluctuations of a saw cylinder with variable intensity of weight and flexural rigidity of sections are given. Data on a new design of saw cylinders with use between the saw laying made on a polymeric basis and equipped with steel pins.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.