Issue |
E3S Web Conf.
Volume 309, 2021
3rd International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED-ICMPC 2021)
|
|
---|---|---|
Article Number | 01064 | |
Number of page(s) | 6 | |
DOI | https://doi.org/10.1051/e3sconf/202130901064 | |
Published online | 07 October 2021 |
Analysis of Hybrid Energy Storage System for Hybrid Electric, Battery Electric and Plugin Hybrid Electric Vehicles using Bidirectional DC/DC converter
EEE Department, GRIET, Hyderabad
* Vijay Krishna Muragani: vijaykrishnam6@gmail.com
This paper deals with the Hybrid Energy Storage System (HESS) for Battery Electric, Hybrid and Plug-in Hybrid Electric Vehicles. Its performance is compared with conventional HESS design and also only Battery design, conventional design uses a bigger dc/dc converter between Battery and Ultracapacitor to satisfy the peak power demands in the real time, In this analysis a smaller dc/dc converter is used which maintains the voltage of ultracapacitor higher than the battery voltage by working as controlled energy pump. Battery will provide power directly only when voltage of the Ultracapacitor drops below the voltage of the Battery. Therefore, a constant and smooth load profile can be created for the battery. For the proposed HESS system Simulation results are presented to verify.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.