Issue |
E3S Web Conf.
Volume 309, 2021
3rd International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED-ICMPC 2021)
|
|
---|---|---|
Article Number | 01187 | |
Number of page(s) | 6 | |
DOI | https://doi.org/10.1051/e3sconf/202130901187 | |
Published online | 07 October 2021 |
Dissimilar Welding of Austenitic and Martensitic Stainless Steel Joints for Nuclear Applications: a review
1 Assistant Professor, Department of Mechanical Engineering, Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad, Telangana 500090, India
2 Associate Professor, Department of Manufacturing Engineering, Annamalai University, Annamalai Nagar, Tamilnadu 608002, India
3 Professor, Department of Mechanical Engineering, Gokaraju Rangaraju Institute of Engineering and Technology, Hyderabad, Telangana 500090, India
* Corresponding author: author@e-mail.org
Dissimilar Welding of Austenitic and Martensitic Stainless Steel Joints are commonly preferred in Nuclear Reactors where high temperature applications are needed. There has been a huge demand for materials which sustain corrosive environment with high rupture strength along with high temperature and pressure. These materials can be directly replaced with the traditional nickel based alloys to compensate for cost cutting and satisfy strength requirements. Dissimilar welding of these materials has been challenging due to the difference in its composition, properties and also heterogeneity in microstructure of these materials. A Study was done to identify what are the commonly used joining techniques, the mechanical properties of the joints and also the microstructure evolution of the dissimilar weld joints. This paper will emphasize on the work that was previously published in the area of dissimilar welding of these combinations of materials and also their challenges.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.