E3S Web Conf.
Volume 313, 202119th International Stirling Engine Conference (ISEC 2021)
|Number of page(s)||5|
|Section||Stirling Engines Prototype Development and Testing|
|Published online||22 October 2021|
Demonstration of flywheel-based travelling-wave thermoacoustic engine
Department of Mechanical Systems Design, Tohoku University Aramaki, Aoba-ku, Sendai, 980-8579, Japan
2 Laboratoire d’Acoustique de l’Université du Mans Avenue Olivier Messiaen, 72085 Le Mans Cedex 9, France
* Corresponding author: firstname.lastname@example.org
We report test results on a thermoacoustic engine having a piston-crank-flywheel assembly. The engine maintained steady rotation states when the heating temperature was increased more than 114°C. The rotation frequency increased with the higher heating temperature and reached 14.5 Hz when it was 296°C. The pressure versus volume diagram was created to deduce the power delivered to the piston-crank-flywheel assembly from measurements of the pressure of the working gas and the rotation angle of the flywheel.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.