E3S Web Conf.
Volume 315, 2021VIth International Innovative Mining Symposium
|Number of page(s)||11|
|Section||Innovations in Mining Machinery|
|Published online||28 October 2021|
The stress-strain state simulation for the auger-boring machine’s support-guide system
1 T.F. Gorbachev Kuzbass State Technical University, Department of Mining Machines and Complexes, 650000, Kemerovo, 28 Vesennyaya st., Russian Federation
2 T.F. Gorbachev Kuzbass State Technical University, Department of Information and Automated Production Systems, 650000, Kemerovo, 28 Vesennyaya st., Russian Federation
3 T.F. Gorbachev Kuzbass State Technical University, Prokopyevsk branch, Department of Information Technologies, Mechanical Engineering and Motor Transport, 653033, Prokopyevsk, 19 Nogradskaya st., Russian Federation
4 State Key Laboratory of Mining Disaster Prevention and Control Co-founded by Shandong Province and the Ministry of Science and Technology, Qingdao, 266590, China
* Corresponding author: email@example.com
The article deals with a number of important aspects of the aggregate-modular type auger-boring equipment creation, as an integral part of the range of tunneling complexes for mining operations and laying horizontal and slightly deviated holes for various purposes. The importance of improving the support and guide systems, characterized by a variety of configurations and sizes, a large number of elements for various purposes and with different responsibility degree, is noted separately. In this regard, the possibility of flexible refinement of the complexes configuration for specific boring conditions with the verification of each applied technical solution by computer modeling remains relevant. The ways for a new constructive solutions creating are outlined.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.