Issue |
E3S Web Conf.
Volume 318, 2021
Second International Conference on Geotechnical Engineering – Iraq (ICGE 2021)
|
|
---|---|---|
Article Number | 01017 | |
Number of page(s) | 10 | |
Section | Developments in Geotechnical Engineering | |
DOI | https://doi.org/10.1051/e3sconf/202131801017 | |
Published online | 08 November 2021 |
Improvement Separation Layer of Disconnected Piled Raft Foundations using Geogrid and Geocell Layers
Civil Engineering Department. University of Technology-Iraq, Baghdad, Iraq
a ayatflower1996@gmail.com
b mahmoudal_qaissy@yahoo.com
c husamhb65@yahoo.com
To control the problems of high stresses and applied moments in the piled raft foundations disconnected piled were used and the piles considered as reinforcement to the soil rather than as structural members, the gap (separation layer) between the piles and the raft can be filled with stabilized granular material which distributes the stresses below the raft and decreases the concentration stresses at the pile heads. Fifteen model tests were performed using three precast concrete pile models embedded within soft clayey soil of undrained shear strength 30kPa. Flexi-Force sensors were used fixed on piles head and the surrounding soil to measure the sharing load transmitted to piles and the surrounding soil. Geogrid and geocell materials were used in different depths and in multilayers to reinforce the separation layer and increase its stiffness. The results show that when reinforcing the separation layer with geogrid at different depths, an increase in depth over the top of the piles reduced the bearing pressure. When used, geocell reinforcement significantly increases in load carrying capacity, and a significant reduction in footing settlement occurs.
Key words: Piled raft / disconnected piled raft / separation layer / geogrid, geocell
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.