| Issue |
E3S Web Conf.
Volume 320, 2021
Energy Systems Environmental Impacts (ESEI 2021)
|
|
|---|---|---|
| Article Number | 04016 | |
| Number of page(s) | 7 | |
| Section | Power Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202132004016 | |
| Published online | 09 November 2021 | |
Numerical Simulation of Multiphase Flow Structures in Openfoam Software Package
Peter the Great St.Petersburg Polytechnic University, St.Petersburg, Russia
* Corresponding author: ivanov_ea@spbstu.ru
Numerical simulation of various structures of multiphase flow in the pipe was performed using the OpenFOAM software package. A visual comparison of multiphase flow design structures for separated stratified-wave, plug and annular flow modes with experimental data is presented. For multiphase flow modelling the solver compressibleInterFoam was used. From the results of numerical modelling, it follows that the OpenFOAM software package allows correct prediction of multiphase flow modes in the pipe depending on Reynolds numbers for gas and liquid phases of the flow.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.