Issue |
E3S Web Conf.
Volume 321, 2021
XIII International Conference on Computational Heat, Mass and Momentum Transfer (ICCHMT 2021)
|
|
---|---|---|
Article Number | 01006 | |
Number of page(s) | 5 | |
Section | Fluid | |
DOI | https://doi.org/10.1051/e3sconf/202132101006 | |
Published online | 11 November 2021 |
An image analysis method for determining boiling front in minichannel heat exchanger
Department of Mechanics and Applied Computer Science, Faculty of Mechanical Engineering Bialystok University of Technology, Wiejska 45 A, 15-351, Bialystok, Poland
* Corresponding author: rafalkogabriela@gmail.com
In this work a numerical method for determining boiling front in short time period of flow was presented. A non-stationary boiling in rectangular eleven minichannels (0.25 mm x 0.25 mm x 32 mm) was recorded using Phantom v1610 high speed camera with the speed of 6000 fps. In the algorithm correlation between subsequent frames was computed. Frames were divided into reference and test frames. In each iteration a part of a reference frame called ‘reference gate’ and moving part of a test frame called ‘moving gate’ were considered. A two-dimensional correlation coefficient was calculated. Such method allowed to identify the location of boiling front in each minichannel separately.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.