| Issue |
E3S Web Conf.
Volume 335, 2022
The 2nd International Conference on Environmentally Sustainable Animal Industry (The 2nd ICESAI 2021)
|
|
|---|---|---|
| Article Number | 00008 | |
| Number of page(s) | 7 | |
| DOI | https://doi.org/10.1051/e3sconf/202233500008 | |
| Published online | 14 January 2022 | |
Effect of using fresh palm oil and used palm oil as a fatliquoring agent to the physical quality of tilapia fish skin in vegetable tannery
1 Faculty of Animal Science, Universitas Gadjah Mada, Yogyakarta 55281, Indonesia
2 Department of Leather Processing Technology, Politeknik ATK Yogyakarta, Yogyakarta 55185, Indonesia
* Corresponding author: artiwi@mail.ugm.ac.id
Fish skin is one of the alternative materials to replace the common animal skin that used in the leather tannery. This research was carried out by vegetable tanning to the tilapia fish skin using selected concentration of fresh palm oil and used palm oil. The study aims to find out the physical quality of leather through the using of fresh and used palm oil as fatliquoring agent in the vegetable tannery process. The same concentration of fresh palm oil (5%) and used palm oil (5%) were used in this study. The parameter of tensile strength, elongation, and shrinkage temperature as physical quality was observed in triplicates. Based on the results, tensile strength and leather elongation were significantly increased, while the shrinkage temperature was not significantly affected. In conclusion, the addition of palm oil caused the increasing tilapia fish skin quality that can be used for commercial products, and it became the alternative material that could be use in vegetable tannery processing.
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.