| Issue |
E3S Web Conf.
Volume 336, 2022
The International Conference on Energy and Green Computing (ICEGC’2021)
|
|
|---|---|---|
| Article Number | 00005 | |
| Number of page(s) | 7 | |
| DOI | https://doi.org/10.1051/e3sconf/202233600005 | |
| Published online | 17 January 2022 | |
Heat and power plant chimneys thermal inspection with an infrared camera
Kielce University of Technology, Faculty of Environmental Engineering, Geomatics and Power Engineering, Kielce, Poland
* Corresponding author: kstokowiec@tu.kielce.pl
Thermography is getting more and more popular in many fields of everyday life nowadays. It is successfully applied in heat investigations. Infrared cameras imaging includes thermal analyses of building physics, thermal bridges or insulation improvement inspection. Flir E30 infrared camera was used in order to conduct measurements of two chimneys located in Kielce Power Station in Poland. The first tested facility is a structural steel chimney thermally isolated with mineral wool. The other chimney is built of reinforced concrete material. An infrared camera tests enabled the creation of the diagrams presenting the temperature distribution along the chimneys in different orientations. The research proved the correct functioning of both chimneys.
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.