| Issue |
E3S Web Conf.
Volume 347, 2022
2nd International Conference on Civil and Environmental Engineering (ICCEE 2022)
|
|
|---|---|---|
| Article Number | 04013 | |
| Number of page(s) | 9 | |
| Section | Water and Environmental Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202234704013 | |
| Published online | 14 April 2022 | |
Verification of the selected thermal comfort model in real and simulated conditions
Faculty of Environmental, Geomatic and Energy Engineering, Kielce University of Technology, 25-314 Kielce, Poland
* Corresponding author: ldebska@tu.kielce.pl
The article below aims to analyze the feeling of thermal comfort model in real and simulated conditions. The research and survey were carried out on a group of students in the lecture hall, “Energis” intelligent building, Kielce University of Technology. The respondents assessed thermal impressions in real situation. In the climate chamber, the climatic room quality were simulated. Particular attention was paid to temperature and humidity, which were set at the same values as in the room. Two comfort states were compared, and the results are presented in individual charts. Based on the tests, it can be stated the Fanger model is not accurate in describing thermal sensations of people – especially in the case of simulated (laboratory) conditions.
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.