E3S Web Conf.
Volume 351, 202210th International Conference on Innovation, Modern Applied Science & Environmental Studies (ICIES’2022)
|Number of page(s)||4|
|Published online||24 May 2022|
A New Design of a Miniature Microstrip Bandpass Filter for DCS Applications
1 MIET laboratory FSTS, Hassan First University of Settat, Morocco
2 LABTIC, ENSA of Tangier, University of Abdelmalek Essaadi
3 LIMIE laboratory ISGA Casablanca, Morocco
4 Microwave group, ESEO, Angers France
* Corresponding author: firstname.lastname@example.org
This paper presents a new miniature Microstrip Bandpass Filter optimized and validated for DCS (Digital Cellular System) Band. The proposed filter is based on a Microstrip resonator. Each port has a step impedance feed line that can be used to adapt the filter's input impedance to the characteristic impedance Z0. The suggested filter is installed on a low-cost FR-4 substrate with a dielectric constant of 4.4, a thickness of 1.6 mm, a loss tangent tan (δ) = 0.025, and a metal thickness of t = 0.035 mm. It has a bandwidth of 1.68GHz to 2.05GHz. Two electromagnetic solvers are used to optimize and validate this filter. The whole dimensions of the final circuit are 33.6x40 mm2.
This filter is suitable for mobile communication.
Key words: Microstrip Bandpass Filter / Microstrip resonator / DCS
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.