Issue |
E3S Web Conf.
Volume 352, 2022
7th International Conference on Energy Science and Applied Technology (ESAT 2022)
|
|
---|---|---|
Article Number | 01043 | |
Number of page(s) | 4 | |
Section | Fossil Energy & Geological Engineering | |
DOI | https://doi.org/10.1051/e3sconf/202235201043 | |
Published online | 27 June 2022 |
Optimization of EOR after combined flooding
Daqing Oilfield Co., Ltd. No.5 Oil Production Plant Geology Institute, Daqing 163000, China
After polymer flooding treatment, the oil recovery can be enhanced through the application of advanced technology. However, in practical applications, excess residues will be generated after polymer flooding treatment. Therefore, in the analysis and treatment of residues, the distribution law of residues after polymer flooding is analyzed, and the recovery process and distribution treatment process are carried out. optimization to achieve enhanced oil recovery after polymer flooding. After the polymer flooding treatment, the high concentration and high molecular weight polymer treatment can improve the recovery rate of crude oil, and on the basis of the polymer flooding treatment, the polymer flooding effect can be improved, which can effectively improve the crude oil recovery rate. recovery and improve the development efficiency of oilfields.
Key words: Polymer flooding / Recovery ratio / Optimize
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.